Posts Tagged ‘Shower’

How To Choose The Correct Shower To Suit Your Home

Tuesday, May 24th, 2011

How To Choose The Correct Shower To Suit Your Home

Starting the day with fresh, invigorating shower is one of the the best ways to start your day off, but if you choose the wrong shower or your current shower is of poor quality then you might find this article helpful in choosing the correct shower to suit your home. Showers are convenient, space-saving, and also energy efficient, using on average only a fraction of the water it takes to fill a bath. Before choosing a shower for your bathroom, you will need to check your water pressure, you will also need to make a choice between a mixer shower, electric shower or power shower.

Check your water pressure.
Find out what sort of hot water supply you have, as this can have an effect on your choice of shower. Combination boilers offer the highest water pressure, but do not work well with power showers or shower booster pumps as the combination boiler does not allow for dragging of water feeds, but work well with mixer showers where the hot and cold water supplies must be at equal pressure for effective showering. If your home has a low-pressure gravity fed water system where hot water is stored in a tank in the airing cupboard and the cold water is supplied from a tank in the loft, then you will enjoy a reasonably powerful shower as long as there is at least a one metre drop from the bottom of the cold water storage tank to the top of the shower head, add a shower booster pump or a power shower to get the most from your shower. If the drop is less than 1 meter and you don’t want to install a booster pump or pumped shower it may be possible to raise the cold water tank by placing it on a platform giving you a greater gravity drop. If you need further assistance with assessing water pressure, a qualified plumber or professional bathroom installer will be able to help. For homes with high-pressure systems, a mixer shower will perform best taking water from both the hot and cold water supplies and mixing them to accurately via the shower valve to reach the desired temperature, making mixer showers ideal for homes with a plentiful supply of pressurised hot water. Choose from exposed shower valves, rigid riser showers where the pipe work is easily installed to your tiles, or concealed shower valves where the valve is seen, but the pipe work is hidden behind the wall.

Thermostatic mixer shower
The addition of thermostatic mixer control gives added convenience as an inbuilt thermostat ensures water temperature is constant and may also include a locked max temputure switch to prevent scaulding, which can be overided. A safe option for young children, or the elderly, this is also a good choice for busy family homes as the inbuilt control also ensures that the water temperature will not be affected by water being used elsewhere in the house.

Shower Panel Towers.
For a luxurious variation on the mixer shower. Why not try the full body shower experience, offered by the shower panel towers with built in shower body jets. Unlike the traditional mixer shower with just one fixed head, these stylish showers feature directional jets which massage and clean the whole body. This type of shower requires fairly high pressure to perform well.

Power Showers.
Ideal for homes with low water pressure, but are a heavy drain on water rescources as power showers use a lot more water than any traditional shower, sometimes more than having a bath. a power shower will take water feeds from the hot and cold storage tanks, mix them together to reach the ideal temperature and then boost water flow with a small built in electric pump. It’s easy to operate and there is greater control over both the pressure and temperature of water than with a mixer shower, resulting in an exhilarating shower experience.

Electric Showers.
Suitable for any domestic water system, an electric shower will only take water from the mains cold water supply, heating up only the amount used each time, making it an economical choice, and also suitable for busy family bathrooms where showers are in frequent use. The greater the KW rating, the higher the flow of water at desired temperature. Look for models featuring a stabiliser as this will ensure the temperature and water supply remain unaffected by other water usage elsewhere in the house.

Special features to look for.
Multi-spray showerheads offer a choice of spray patterns usually selected by rotating the outer-ring on the spray head. Also look for large ceiling mounted showerheads offering a rain-style shower.

Accessories.
Look for soap dishes or hanging hooks, often supplied with electric showers and rigid riser showers.
Easy-grip controls
Look for dials that are easy to grip, turn and clearly labelled.

If you feel you can add more information to this article then please send us your comment along with a link to your site, please dont not send us spammy comments as they will not be posted.

2010 For Chrome Taps & Showers

Wednesday, April 7th, 2010

It has been a great start in the 2010 for Chrome Taps & Showers, with the release of the new site and new products like our new range of chrome towel radiators at unbeatable prices. This has all proven to be very effective with increased sales and a higher traffic rate. On that note i would like to say a big thank you to our web developer and our seo guru, mention no names but they know who they are, for all the hard work you guys have put in over the last year.

Looking to the year ahead we shall be updating our product listings, introducing more relevent products for our customers and making a better use of our resources. Another product that we have launched this year is our Led kitchen spray tap this product is proving to be a fantastic seller, far better than we 1st thought it would be, but if this what the customer wants then this is what the customer shall have, we do try to seek out new and fresh products all the time so our customers can enjoy our website being updated rather than the same old boaring look day after day week after week.

We are currently looking for builders/plumbers & bathroom fitters to be listed on our site working in different parts of the country so we can give our customers a little help finding good plumbers or bathroom fitters around the UK. The chosen people must have an up to date website that we can link to.

Security has been a problem for last few months with rouge customer trying to use stolen credit cards on our main site, we have now installed 3d secure so that customer crdeit cards and ourselves are safe from online fraud.

Installing a Power Shower

Thursday, December 17th, 2009

I don’t know when the handyman site was put up, but installing a shower would no longer be considered a suitable job for a home handyman under the new IEE Wiring regulations – so I’ve written the following?

In the past, installing an electric shower was considered a job suitable for a home handyman. However, under the new IEE Wiring regulations, only minor electrical works are permitted – for example the addition of a lighting point, or adding a socket to an existing circuit.

Any job involving electricity in areas where there is also water (e.g. bathroom or kitchen) must be carried out by someone with a suitable level of competency. In this case competency means a full, qualified knowledge of electrical installations. You will need to have the ability to thoroughly check a circuit for safety and to issue a minor works certificate as a self certified “competent person”.

Any electrical installation of this kind will require that the completed job is tested by a fully qualified electrician who will issue a minor works certificate. Failure to do this may render your house insurance invalid, and could cause problems when you come to sell your house.

It is thus no longer within the remit of a site such as this to advise you on installing an electric shower in your home.

All About Showers

Wednesday, December 16th, 2009

The act of showering began when the earliest beings stepped beneath a waterfall to cleanse their bodies. Using a shower that held and delivered water for bathing dates back to Ancient Greece, where showering was recorded on murals and vases.

Today, showering is the most popular bathing method for busy households. Soaking in a bathtub has become something of a luxury—both because of the time it takes to pour and enjoy a bath and because of the amount of water a full tub consumes. Just filling a whirlpool bath can take 10 minutes and require more than 60 gallons; a low-flow showerhead will deliver 7 to 10 gallons of water during a 4-minute shower.

Showers are also preferred over bathtubs because they clean the body more effectively and are easier to maintain. Dirt and bacteria are immediately washed down the drain. They are also easier and safer for the elderly and handicapped to climb into and out of.

The downside of a shower is that, because it sprays water, can regularly put more moisture into the air and onto the walls and floor than a bathtub. A properly built and enclosed shower is critical to the integrity of a bathroom. The heavy flow of water raining down on the interior surfaces of a shower must be shed by the walls and drained away by the floor pan to prevent mildew, mold, and moisture damage.

Showers may be custom built or installed as prefabricated integral units which may or may not include a bathtub. Many options are available. In this section of HomeTips, you will gain an overview of the many types and receive help with making informed design and buying decisions. You will also find important DIY tips for proper installation, care, and repair.

How To Remove Limescale From A Wall Mounted Shower Head

Sunday, December 13th, 2009

How To Remove Limescale From A Wall Mounted Shower Head

There’s nothing more relaxing then having a shower after a hard days work, but what happens if the shower heads shooting water out everywhere. This problem is a common one found in most households and can be fixed by removing the shower head from the shower arm, but what if your unable to take the shower head off. If you include yourself in this category and own a wall-mounted shower then no need to worry, as there’s a way to get around it and solve this problem.

Grab a plastic bag making sure there is no holes, and pour a mixture of vinegar and water inside it. Check that there is enough in there to completely cover the wall-mounted shower head, but so much that the mix wont overflow out the bag. Now tie an elastic band between 2 or 3 times at the top of the bag, as tying the elastic band around the top of the bag with the shower head in the vinegar and water can be a burden. Fasten the bag containing the mixture to the arm of the shower using either some string or your elastic band, but make sure that the string you use is strong enough to hold the bag around the shower head for several hours.

When you have secured the shower head in the bag, allow the mixture to work by letting it soak for 3-24 hours depending on the thickness of the limescale. Once your happy with the amount of time you have left it for, separate the shower head from the bag containing the vinegar and water mix and turn the shower on to test the flow of the water. If there’s any excess limescale found around the shower head, then use a toothbrush to get rid of it as the thistles will catch the majority of the limescale left. You are now able to have a relaxing shower once again.

At Chrome-tapshower.co.uk we hold are large amount of shower heads, all include a 48 hour delivery from purchase and a 10 year guarantee.