How To Remove Limescale From Your Shower Head
If you enjoy showers and your shower head is sending water everywhere through the holes, then you have a case of limescale build up. It can be very frustrating when some nozzles shoot the water out properly, while others trickle or squirt it out in another direction. This can be be a problem, but 1 that can be solved with a few simple DIY tricks.
First you will need to remove your shower head because after, you will have to put it in a bowl of water mixed with vinegar. This is because limescale is soap residue and hard water merged together producing a weak alkaline substance, while vinegar is weak acidic liquid for that reason cancelling the alkaline reaction therefore removing the limescale. The water it’s mixed with is used to clean the nozzles as well. Depending on how thick your limescale is, you should soak the shower head in the bowl for at minimum of 3 hours for it to work.
Now separate the shower head from the bowl and using clean water, wash the shower head making sure you get rid of any excess limescale left. Then with a needle or toothpick, stab through the holes on the shower head to remove the limescale trapped inside them. To take off the limescale that develops on the surface of the shower head use a toothbrush so it catches the hard places, finally reconnect the shower head back on the arm of the shower and try it out to see if the water flows out correctly again. If the problem still exists then repeat the procedure, altering the amount of vinegar and water in the bowl.
Have a look at our range of showers and shower heads designed to match your bathroom, products come with a 10 year guarantee and a 48 hour delivery from purchase.
Tags: How To, Limescale, Remove, Shower, Shower Head