I want to talk you through the simple steps of replacing your kitchen taps the right way using minimal effort and know how.

The first thing you need to get is an adjustable spanner and a flat headed screw driver. Once you have these we can then begin removing your current taps ready to fit your new ones.

The first thing we do is turn off the water, this is where our flat headed screw comes in handy. You need to go into the cupboard below the sink and coming down through where the taps are should be two pipes, these supply your hot and cold water feeds.

If you follow the pipes down there should be a valve on each one, there should be a slit where you can insert your screwdriver and turn the valve to the left. This should of turned the water supply off, just runs the taps to make sure, you will get some water coming through but should stop once the pipes have emptied.

Above the valves should be a nut which you undo using your adjustable spanner, undo the nuts until the pipes become loose and free from the the rest of the system. Then undo the nut below the work surface which holds the taps in place, once you have done this you will then be able to remove your taps by simply lifting them out.

You then drop your new kitchen tap in place of the old and and reverse the process we just went through. Remember to turn the valves back on by using your screwdriver and turning the valve to the right.

Run the taps just to make sure everything is fine and then that’s it, job done.

I can assure you that this is a simple task and one that anyone can, so if your not sure just read the simple steps below and make your mind up for yourself.

You’ll need a screwdriver and a bag of different sized washers before you begin.

First off you need to isolate the water supply and turn it off, normally there is a valve under the sink which is connected to a pipe that runs up to your tap. You should have two pipes and two vales, one for your hot water and one for your cold. You should turn both valves to the left using e screwdriver and then run both taps until e water stops which shouldn’t take that long.

To replace a tap washer you need to remove the caps of both taps to reveal a screw underneath, you then proceed to remove which will then allow you to life off the tap itself. There should be a nut which you then also remove using the adjustable spanner, this should allow you to remove the head gear assembly which should have a washer around it. There should be wear and tear on the washer which will give you an indication to which tap is leaking, you then replace the faulty washer (you may as well replace the other one while you’re at it) and then fit it all back together in the same way in which we took it apart.

This shouldn’t take you long to do and if you are thinking of replacing your bathroom or kitchen taps then take a look at what we have on offer. We have the best kitchen and bathroom taps around, at the best prices, and we’re not just saying that, we also offer free next day delivery to!

How To Replace A Kitchen Or Bathroom Tap

To start off you will need to get yourself the following items, you’ll need a screwdriver, an adjustable spanner and a cloth. You’ll also be happy to know that fitting a tap has got a lot easier over the years as manufacturers make there designs more easy and less complex.

First off you need to look for an isolation ball valve which is normally on the type(s) in the cupboard below the sink itself. It’s should look like a screw in the middle of the pipe which you turn to your left using the screwdriver we grabbed earlier. Once you have done this run the taps until the water trapped in them has passed through and then go back into the cupboard where the valve were.

This is where we start to replace the taps. Above the valves we just switched off (you may just have one valve and one pipe) there should be a nut which you should now remove using the adjustable spanner. There should also be a nut and bolt below the work surface that secures the tap in place, remove that and pull the tap up from above and remove the tap and pipes completely.

Now you can fit your brand new one supplied by us with everything you need to simply drop in back in the place of the old one by reversing the process of taking out your old one.

Its as simple as that!

If you get stuck or need any help just simply leave a comment and someone will answer you.

We stock everything related to taps, this includes the different types, valves and other miscellaneous items, everything you can think of we stock it. We also have a contract with a reputable courier service which means in most cases you will get your order the following day which can be a relief to customers who have a deadline.

We have been operating for over 12 months and have fulfilled thousands of orders, we have a clean positive reputation and have many reviews all round the web. If you like you can put our business name into google and take a look at some of the reviews yourself. If you have any questions please feel free to contact us and someone will be more than happy to assist you.

Starting the day with fresh, invigorating shower is one of the the best ways to start your day off, but if you choose the wrong shower or your current shower is of poor quality then you might find this article helpful in choosing the correct shower to suit your home. Showers are convenient, space-saving, and also energy efficient, using on average only a fraction of the water it takes to fill a bath. Before choosing a shower for your bathroom, you will need to check your water pressure, you will also need to make a choice between a mixer shower, electric shower or power shower.

Check your water pressure.
Find out what sort of hot water supply you have, as this can have an effect on your choice of shower. Combination boilers offer the highest water pressure, but do not work well with power showers or shower booster pumps as the combination boiler does not allow for dragging of water feeds, but work well with mixer showers where the hot and cold water supplies must be at equal pressure for effective showering. If your home has a low-pressure gravity fed water system where hot water is stored in a tank in the airing cupboard and the cold water is supplied from a tank in the loft, then you will enjoy a reasonably powerful shower as long as there is at least a one metre drop from the bottom of the cold water storage tank to the top of the shower head, add a shower booster pump or a power shower to get the most from your shower. If the drop is less than 1 meter and you don’t want to install a booster pump or pumped shower it may be possible to raise the cold water tank by placing it on a platform giving you a greater gravity drop. If you need further assistance with assessing water pressure, a qualified plumber or professional bathroom installer will be able to help. For homes with high-pressure systems, a mixer shower will perform best taking water from both the hot and cold water supplies and mixing them to accurately via the shower valve to reach the desired temperature, making mixer showers ideal for homes with a plentiful supply of pressurised hot water. Choose from exposed shower valves, rigid riser showers where the pipe work is easily installed to your tiles, or concealed shower valves where the valve is seen, but the pipe work is hidden behind the wall.

Thermostatic mixer shower
The addition of thermostatic mixer control gives added convenience as an inbuilt thermostat ensures water temperature is constant and may also include a locked max temputure switch to prevent scaulding, which can be overided. A safe option for young children, or the elderly, this is also a good choice for busy family homes as the inbuilt control also ensures that the water temperature will not be affected by water being used elsewhere in the house.

Shower Panel Towers.
For a luxurious variation on the mixer shower. Why not try the full body shower experience, offered by the shower panel towers with built in shower body jets. Unlike the traditional mixer shower with just one fixed head, these stylish showers feature directional jets which massage and clean the whole body. This type of shower requires fairly high pressure to perform well.

Power Showers.
Ideal for homes with low water pressure, but are a heavy drain on water rescources as power showers use a lot more water than any traditional shower, sometimes more than having a bath. a power shower will take water feeds from the hot and cold storage tanks, mix them together to reach the ideal temperature and then boost water flow with a small built in electric pump. It’s easy to operate and there is greater control over both the pressure and temperature of water than with a mixer shower, resulting in an exhilarating shower experience.

Electric Showers.
Suitable for any domestic water system, an electric shower will only take water from the mains cold water supply, heating up only the amount used each time, making it an economical choice, and also suitable for busy family bathrooms where showers are in frequent use. The greater the KW rating, the higher the flow of water at desired temperature. Look for models featuring a stabiliser as this will ensure the temperature and water supply remain unaffected by other water usage elsewhere in the house.

Special features to look for.
Multi-spray showerheads offer a choice of spray patterns usually selected by rotating the outer-ring on the spray head. Also look for large ceiling mounted showerheads offering a rain-style shower.

Accessories.
Look for soap dishes or hanging hooks, often supplied with electric showers and rigid riser showers.
Easy-grip controls
Look for dials that are easy to grip, turn and clearly labelled.

If you feel you can add more information to this article then please send us your comment along with a link to your site, please dont not send us spammy comments as they will not be posted.

How to choose the style radiator for your home
There are many styles of radiators available online and in shops today. Traditional column radiators, flat panel radiators, towel radiators for bathrooms or modern aluminum panel radiators. Choose a radiator that suits the style of your room or home, modern style homes would require either something conventional like a panel style radiator or a more traditional cottage style home would require a radiator like horizontal column radiators or cast radiators, some modern homes suit a traditional look if done correctly this is another area where you could use the column radiators but creating a modern feel by using the tall vertical column radiators that can be supplied in white and then painted to suit the color and décor of the room. As a rule of thumb designer sleek looking radiators look great in your home by adding a focal point to the room, but the draw back on buying a designer radiator is low heat output, making your home colder in winter and costing more money in heating bills due to ineffective low efficiency in your radiators heat output.

How to choose the size of radiators required for your home
Radiators as we all know come in various sizes, there is no defined size of radiator that should be used in your home because it is the heat output of the radiator that is important factor. All radiators are generally placed under windows to warm the cold air as it enters the window area; radiators are also located near doorways to again warm the cold air that circulates throughout the house. You can take into account that if your home is well insulated with good draft free windows, you then have open options for the placement of the radiator on any wall. This is great if your want to create a designer look room or just want to organize the room better, in most cases it is a fairly inexpensive job to move the radiator pipe work so you get to pick the correct size radiator to suit your room.

How to choose the correct Heat output (Btu`s) radiator to heat your room
All radiators have a temputure output rating called Btu`s (British thermal units) or another rating is called watts. When buying any radiator always check the btus or watts of a radiator as these will give you the correct output you need to heat your room. If you don’t understand how to calculate the btus required for a room you 1st need to calculate the size of the room, width, length, height you then need to calculate the insulation levels. This is all no easy task, this is why it’s best to use an online Btu calculator like ………….. Recommended. Just enter some simple information into a few fields then you have your btus and watts so you know what is the correct heat output radiator for your room.

So hopefully now you have a great idea of what to look for when buying radiators for your home, here is an other online resource to get you started buying your radiators www.radiatorsuperstore.co.uk

You can use this article on your site but you must use inclued the links back to Radiator Superstore

Plumbers in London

www.eliteplumbinguk.com

Plumbers in London

www.plumbers-central-london.co.uk

Plumbers in Luton

www.medwayplumbersluton.co.uk

Plumbers in Hertfordshire

http://www.hicksonscott.co.uk

Builders in Hertfordshire

www.grangebuilders.co.uk

Bathroom Fitters Luton

www.propertymaintenancedunstable.co.uk/

Builders Luton

www.buildingservicesbedfordshire.co.uk

At chrome-tapshower.co.uk we don’t just sell high end taps and showers we also provide information and tips on how to maintain your appliances. This article was written by one of our team members so if you have any questions or would like to add to this article then just leave a comment at the bottom of this post.

Ceramic disc cartridges are made with two ceramic discs each with two holes (for mixers) or 1 hole (for pillar or 2 handle taps) in it. One disc moves with the tap handle and the other disc remains in position. When these holes are aligned, the water is allowed to flow. In the off position, the holes are no longer aligned and the water stops.

These regulate the flow of water from your tap. It can happen that small particles get stuck in the disc assembly and you must clean the cartridge. In extreme cases you must replace the cartridge but obviously it is better to clean the cartridge before replacing it.

1. Turn off the water supply. Place a cloth over the waste hole to catch any small screws or parts that may accidentally drop into the basin/sink as you work.

2. Remove the cartridge

3. Examine the cartridge. Clean and rinse the seals, openings and cylinder. If a seal is damaged then replace it

4. Remove mineral deposits stuck on the ceramic discs. A drop of food coloring may reveal a cracked ceramic disc. If you see a crack you must replace the cartridge

5. Reassemble and test. Ensure the tap is in the ‘on’ position and slowly turn the water supply back on. Too much pressure too fast can harm the discs in the cartridge

6. If the tap still leaks you need to replace the old cartridge

If you found this article to be useful please share it with all your friends and feel free to take a look at what we stock. Your welcome to link back to this content and display it on your own site as long as you include the two links below.

Kitchen Mixer Taps
Taps and Shower

If you have a room in your house that you just don’t like, and it’s your kitchen – then it’s time to remodel! Most older kitchens in London simply don’t have enough space to accommodate today’s lifestyles. One of the best investments you can make in your home is to remodel your kitchen. Money spent upgrading your kitchen will most likely be recouped if you decide to sell. More importantly you will enjoy the luxuries of the new style.

Imagine what it was like for one homeowner who finally decided to upgrade their oven because they were selling their home. They had been living with two burners for seven years. Their realtor told them that upgrading to the standard “four” burners would help their house sell faster. Imagine that – they didn’t really get the benefit of four burners because they never thought to remodel until it was time to sell!

If you’re tired of your kitchen you can start exploring your options even if your budget isn’t quite ready to get started. Here are some things to things about:

* Does your current kitchen have the right amount of space? Would you prefer that it was bigger or smaller?

* What style appeals to you? This is a room that you will have to live with for awhile. The latest and greatest trends in kitchens might not be right for you. Paint colors can be easily changed, but the foundations such as flooring, countertops and cabinets should feel comfortable to you for the long run.

* How do you want your remodeled kitchen to function? Your lifestyle will help you to determine what new appliances are important. For example, if you really love to cook, you might want to look at appliances that appeal to professionals. If you are always on the move, quick and convenient might be your best choice.

* What do you want from your remodeling contractor? You may need a little bit of direction, or a lot. Make sure that you hire a company that is licensed and insured and that you feel comfortable with.

Kitchens are generally the heart of a home. Your ultimate goal is to turn your kitchen into a room that you love.

There’s nothing more relaxing then having a shower after a hard days work, but what happens if the shower heads shooting water out everywhere. This problem is a common one found in most households and can be fixed by removing the shower head from the shower arm, but what if your unable to take the shower head off. If you include yourself in this category and own a wall-mounted shower then no need to worry, as there’s a way to get around it and solve this problem.

Grab a plastic bag making sure there is no holes, and pour a mixture of vinegar and water inside it. Check that there is enough in there to completely cover the wall-mounted shower head, but so much that the mix wont overflow out the bag. Now tie an elastic band between 2 or 3 times at the top of the bag, as tying the elastic band around the top of the bag with the shower head in the vinegar and water can be a burden. Fasten the bag containing the mixture to the arm of the shower using either some string or your elastic band, but make sure that the string you use is strong enough to hold the bag around the shower head for several hours.

When you have secured the shower head in the bag, allow the mixture to work by letting it soak for 3-24 hours depending on the thickness of the limescale. Once your happy with the amount of time you have left it for, separate the shower head from the bag containing the vinegar and water mix and turn the shower on to test the flow of the water. If there’s any excess limescale found around the shower head, then use a toothbrush to get rid of it as the thistles will catch the majority of the limescale left. You are now able to have a relaxing shower once again.

At Chrome-tapshower.co.uk we hold are large amount of shower heads, all include a 48 hour delivery from purchase and a 10 year guarantee.